One of our major oil and gas clients is seeking a Piping Designer I to work on a 12-month assignment in Ponca City, OK. 

Description: 
• This position is for a contract Mechanical Designer 
• This position is located at the Ponca City Refinery 
• Typical hours are 8 hours a day Monday-Friday, overtime possible. 
• This candidate will work on Refinery Technical Services (RTS) projects piping drawings 

 
Required Qualifications 
• CAD experience (1-5 yrs) 
• Desire to learn is extremely important 
• Must be able to function as part of a project team 
• Able to interact and work with a diverse work group (Mechanical Craftsman, Engineers, Contractors) 

 
Desired Qualifications 
- Auto CAD experience 
- 3D Modeling experience 
- Associate Degree in Design, Drafting or Engineer Tech 
- Knowledge of piping design and structural layout 
· Learn the design standards and codes that apply to the drawings being created 
· Work as part of a design team to put together design packages 
· Use Ponca City Refinery's design standards and project procedures to create project drawings including the following but not limited to: 
o Schematics / Isometrics 
o Building layouts, equipment layouts, and pipe routing 
o Pipe schedules 
o Installation Details 
o Bill of Materials 

• Support/assist the lab supervisors/chemists by performing routine and non-routine laboratory analysis/wet chemistry on product and in-process samples, to support plant operations for the purpose of quality assurance/control.
• Perform calibration and maintenance of test equipment.
• Prepare samples and ensure accurate data generation and records, in accordance with the standard operating procedures.
• Utilize analytical instruments to address quality assurance/control issues.
• Prepare chemical stock solutions and reagents, as well as set preparation standards.
• Position will receive direction and support.

• Polytechnic graduate with the background in Chemical/Process/Technical Engineering.
• Computer-literate.
• Preferable experience in quality control systems.

SUBCONTRACTS SPECIALIST

Location: Boden, SE
Contract duration: initial 12 month contract - renewable
Start Date: ASAP
Roster: Rotation – 6 weeks Boden, 2 weeks off. 53 hours per week.
Project: Boden BOP project

Job Overview:
The Subcontracts Specialist applies their conceptual knowledge of subcontracts and with a moderate level of guidance and direction from colleagues and leadership, is responsible for solving a range of straightforward subcontracts problems. They will be responsible for analyzing possible solutions using standard procedures, as well as building knowledge of the company, processes, and customers. The Subcontracts Specialist understands key business drivers and applies this knowledge to solve problems in straightforward situations through analysis of possible solutions using technical experience, judgment, and precedents.

Key Tasks and Responsibilities:

• Responsible for the performance and direction of subcontracts input into bid proposal activities including compilation of subcontractor bidding documents, evaluations, and other related information
• Responsible for the performance and direction of all subcontracts commercial and administrative work within the project
• Follow  global procedures outlined in the management system
• Maintain awareness of the content of the HSE (Health, Safety, & Environment) Plan and the actions required in the event of an emergency
• Cooperate in the implementation of the HSE Plan overall and as it applies to subcontractors  
• Insure that  contractual obligations are met by the subcontractor
• Identify, evaluate, prepare, and subsequently agree to subcontract work scope changes and monitor risks to the project  
• Process changes with the subcontractor as directed by the Subcontract Manager or other lead
• Develop and update cost subcontract forecasts for input to Project Controls Manager
• Provide input to project weekly/monthly report
• Understand and comply with the overall sourcing strategy
• May act as an understudy to more senior resources who work with subcontract systems
• Escalate issues to subcontract leadership in a timely manner

• Bachelor’s Degree (or equivalent) in Engineering, Supply Chain Management (or a relevant discipline)
• 3-6 years of relevant experience
• Effective communication and presentations skills  
• Effective problem solver  
• Good decision-maker  
• Effective negotiator

• Manage electrical and I&C projects from initiation (funding requests, project kick-off) through design, execution (field implementation), and closeout.
• Ensure projects follow station processes and project management best practices.
• Oversee project scheduling using online and outage processes.
• Review and manage P6 project schedules for timely execution.
• Coordinate with stakeholders to ensure project alignment with organizational goals.

• Provide expertise in electrical and I&C disciplines for project execution.
• Ensure compliance with all regulatory and safety requirements.
• Support troubleshooting and resolution of technical issues during project implementation.

• Work closely with multi-disciplinary teams to ensure successful project completion.
• Lead, facilitate, and participate in meetings with internal and external stakeholders.
• Provide project updates, reports, and presentations as needed.

• Identify and communicate operational risks, defining risk mitigation strategies.
• Support and implement process improvements, including system testing and workflow enhancements.                                                                                                       

• 6+ years of experience managing electrical and I&C projects at industrial sites.
• Strong understanding of electrical and I&C disciplines in a project management context.
• Experience working with Primavera P6 for project scheduling.
• Proficiency in Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, Project).
• Experience in nuclear projects is highly desirable.

• Contractor will report through the Design Engineering organization and assist in managing site projects.
• Must demonstrate leadership in assigned project areas, ensuring project goals and milestones are met.
• Candidate should be capable of obtaining unescorted access to the facility and completing all nuclear badging requirements.

Airswift has been tasked by one of our major Oil and Gas clients to seek a Senior Instrumentation Engineer to work on a 10 month’s contract in Watford North Dakota.

• Coordinate with Project Engineers, Production Operations, Maintenance, Environmental, Regulatory, HSE, Planning & Scheduling, Surface Projects, Right of Way, Supply Chain, Drafting, and Third-party Engineering to successfully develop and execute facility infrastructure plans in a changing environment.
• Providing Instrumentation and Electrical troubleshooting and optimization support to operations/maintenance.
• Supporting Project Teams, Maintenance and Operations in the execution, commissioning, and start-up of facility upgrades/modifications.
• Collaborate in the development of scope of work definition, preliminary and detailed design, BOM generation, cost estimating, equipment selection, procurement, and construction cost control for Base Facility Projects.
• Develop technical specifications, single line diagrams, schematics, and cable schedules; work with Project Engineers to establish cause and effect charts, control narratives and P&ID's.
• Provide electrical engineering support in Electrical Areas Classification, Arc Flash, Grounding, and Power Distribution Management.
• Coordinate with I&E Designers (In-house & 3rd Party) in the creation of wiring diagrams, grounding plans, Electrical Area Classification, control cabinet layouts, and I&E installation details.
• Abide by and support the Management of Change (MOC) Process, including participation in Pre-Start-up Safety Reviews (PSSRs) to comply with the HSE Management System.
• Participate in Risk Assessment Evaluations and Process Hazard Analysis (PHA).
• Monitor and report on the progress of Base Facility Projects and track/reconcile actual project costs with forecasts.
• Providing creative project options to meet critical schedule constraints or cost requirements.
• Lead and develop programs and standards to support the maintenance of Instrumentation and Electrical equipment in process facilities for Production Operations and Preventative Maintenance Departments within the Business Unit.
• Interpretation and implementation of Corporate & Industry Instrumentation and Electrical Engineering Standards

• Participating in the review of deviations to Corporate and/or Industry Standards.
• Providing direct and impartial feedback on the compliance of Business Unit Facilities with Electrical Codes and classifications to management.
• Lead efforts to ensure modifications, designs, and construction standards for I&E equipment are fully understood and effectively managed through the Management of Change (MOC) Process.
• Direct the sourcing and oversight of Engineering Contractors.
• Support and assist programming efforts associated with PLC, RTU, HMI, SCADA, and radio/wireless designs.
• Demonstrate strong SPIRIT values and be recognized as a technical specialist for the Business Unit.

• Bachelor’s degree or higher in Instrumentation, Controls and/or Electrical Engineering (Or foreign equivalent)
• 5+ years’ experience in Instrumentation, Controls and Electrical Industry
• 5+ years of oil and gas experience
• Experience working with various Engineering disciplines
• Ability to manage multiple projects
• Ability to travel to sites as needed to support field activities
• Willing and able (with or without reasonable accommodation) to travel 20% on a yearly basis

• 10+ years of oil and gas experience
• 10+ years of experience in technical areas of Instrumentation/Automation and Electrical fields
• 10+ years of experience in the design/construction of Oil & Gas Production/Processing Facilities
• 10+ year of experience with programmable logic controllers (PLCs), RTUs, and Scada Systems
• Advanced knowledge of Technical Standards (API, ASME, NFPA, NEC, ISA84, etc.)
• General knowledge of OSHA Process Safety Management (PSM) regulatory requirements
• Knowledge of Cyber Security/Process Control Networks
• Experience with directing Engineering Contractors
• Advanced understanding of the Project Execution process, Concept to Start-up
• Ability to specify appropriate equipment and materials as well as evaluate alternatives
• Communication skills to coordinate with a team of technical professionals
• Experience working with Operations and/or Maintenance Departments
• Competent in written communications and presentations
• Field experience in Construction related activities

Airswift is looking for a Mechanical Technician to work with one of our major clients in La Porte, TX

The Machinery Technician will be working for the Engineering Manager and closely with the Commissioning team, Operations, and Technical Management. This person will be responsible for coordinating, organizing, and executing of mechanical activities for the pre commissioning, commissioning, and startup for new and refurbished facilities, with the aim of ensuring the systems are installed and properly commissioned ensuring plant reliability and availability is maintained per design, in line with business needs for facilities which range across multiple technologies such as Air Separation (ASU), Steam Methane reformer (HYCO), Partial Oxidation (POX), Ammonia, H2 Electrolysis, and CO2, along with ancillary equipment to support the facility.  Cryogenic machinery experience is a key skill.

Nature & Scope

The Machinery Technician, is responsible for maintaining safe, reliable, and efficient operation of the mechanical systems in the facility throughout the end of construction and commissioning phase of the project for equipment which can include rotating equipment such as reciprocal compressors, cryogenic pumps, expanders, etc., and static equipment, as cascaded by Engineering Manager.  

Technical:

• Execute hands on machinery technician related activities for commissioning, startup, troubleshooting, repair, and test activities.
• Provide machinery technician support during the commissioning of the plants. Maintain accurate document control and monitor quality assurance initiatives to maintain the history going forward.
• Provide machinery technician leadership to ensure safety, reliability, and maintainability of the mechanical equipment.

Commissioning

• Ensure the safety of all commissioning personnel by utilizing the Company's Basic Safety Practice program, which includes Safety Work Permits, LOTO, Confined Space, etc.
• Understand Environmental Regulatory requirements
• Support mechanical construction and commissioning activities
• Ensure company's standards, and best practices for EH&S, productivity, reliability, quality, and overall customer services are met
• Monitor and execute commissioning and startup activities pertaining to the operation of mechanical equipment, rotating and static, to ensure safety and reliability targets are achieved
• Maintain equipment commissioning document integrity through accurate technical and inspection reports
• Supervise and assist machinery and mechanical contractors with all site related activities assigned to them, insuring the safety and reliability philosophy is followed
• Working with the operations and engineering teams understand plant issues during commissioning and startup and execute cost effective solutions for resolution to meet the customer’s satisfaction on safety, reliability, product quality, and flexibility on product supply
• Facilitate attainment of operations excellence and customer satisfaction via commissioning productivity, reliability, quality, and cost reduction efforts
• Provide machinery technician support and participate in incident investigations and Root Cause Analysis. Identify & implement sustainable corrective action(s)
• Strong organizational, planning, and interpersonal and communication skills are essential to the position. Credibility and respect across the organization is important.
• The incumbent works closely with operations and engineering to insure alignment with operational objectives.

JOB REQUIREMENTS

• A 2-year diploma in machinery engineering or machinery/ mechanical technician.
• 8 years minimum hands-on machinery technician experience in gas, petrochemical, or related industries in. Air Separation, HYCO, and CO2 facility maintenance a plus.
• Demonstrated technical and practical engineering skills with a good business sense in the maintenance field
• Proven coordination experience in a multi team environment which includes engineering, maintenance, and contractors.
• Strong oral and written skills with the ability to communicate maintenance activities to the ASU management team daily.
• Knowledge of computer-based applications (Microsoft Office) and a working knowledge of an Enterprise Resource Planning system (SAP knowledge a plus) to enter and retrieve data
• Knowledge of the construction and maintenance of large and complex rotating equipment (e.g. compressors, turbines, pumps, expanders), pressurized systems, pipe and welding techniques, and electrical equipment and systems
• Must have experience in commissioning, project work, plant operations and maintenance efforts
• Proficiency in English speaking and writing.
• Knowledge and understanding of local environmental and health and safety requirements.
• Knowledge of vendor contracts and knowledge of shop support

Airswift is looking for a Project Engineer to work with one of our major clients on a long-term contract. The project office and supporting workforce are located in Gonzales, LA with a heavy concentration of operating facilities on the Mississippi River corridor between Baton Rouge and New Orleans.

PRIMARY JOB RESPONSIBILITIES:

• Lead assigned capital projects (standalone plant projects and projects within plant outages) and manage all engineering, design, and construction resources.
• Develop estimates, funding documents, schedule, and ongoing forecasts for plant executed projects within SAP.  Maintain projects on budget and schedule
• Ensure inherent process safety is adhered to on all project designs.  Facilitate management of change, process hazard reviews, and ORI’s.
• Provide field supervision / support during project execution.  Lead Project Safety.
• Hold accountability to quality standards as outlined by Client and Chemicals, Inc.
• Complete project close out and documentation per Client procedures.

QUALIFICATIONS:

• Technical degree (chemical engineering or mechanical engineering preferred)
• 3-10 years’ experience in maintenance and/or engineering disciplines, including industrial outages.  Understanding of piping / electrical / instrumentation design and installation preferred.
• Proficient in the use of computers and business software, including Microsoft (Excel, Word, PowerPoint, PowerPoint, OneNote, Outlook) OneNote. SAP & Primavera P6 preferred.
• Ability to travel 25-40% of the time depending on assigned workload (includes mileage traveled locally).  During outages, 12-hour work days/7 days per week is required to support project execution.
• Obtain TWIC, passport, and refinery access / background checks
• Pass Criminal background investigation. Individuals will be subject to pre-employment, reasonable cause periodic, random, and post-accident drug and alcohol testing.

SAFETY RESPONSIBILITIES:

• Conduct Safety Kickoff Meeting with contractors and operations team prior to start of project execution.  Clearly communicate safety goals – 0 Recordables, 0 First Aids 
• Ensure all contractors on site for project execution have submitted an Emergency Action Plan prior to mobilization
• Lead daily morning safety / toolbox meetings with all crafts  
• Complete JSA reviews and fill out JSA Review form daily during execution of project
• Participate in the Safe Work Permit issuance process with the operations team
• Complete short-term contractor BSP (Basic Safety Process) forms daily during execution of project
• Report all incidents immediately and support initial response, investigations, and RCAs as required.
• Participate in Safety Sampling and Critical Safety Audits during outages
• Attend and contribute to monthly group Safety Meetings

Job Title: Technical Clerk
Contract: 12-Month Fixed Term
Location: Tilbury, Essex
Industry: Engineering, Construction
About the Role:
We are seeking a Technical Clerk to support small projects within the company. This role involves a mix of office administration, document control, material management, and cost control administration, ensuring the smooth operation of projects.
Key Responsibilities:
Office Administration:

• Manage weekly timesheets from site for payroll purposes.
• Provide ad hoc assistance to maintain an efficient office environment.
• Oversee stationery and office equipment procurement.
• Coordinate with the HR department for onboarding site personnel.
• Handle client communications, phone calls, and correspondence.

• Deliver comprehensive administrative and document control services.
• Participate in HSEQ audits for ISO compliance.
• Compile test packs and handover documentation in collaboration with QAQC.
• Update and maintain drawing registers.

• Obtain supplier quotations and process material requisitions.
• Manage delivery dockets and complete Goods Received Notes (GRNs).
• Oversee office equipment and stationery purchases.
• Maintain the site Plant and Tool Register (Asset Register).

• Record man-hours and compile data for the Commercial team.
• Maintain records of labour and material costs.
• Assist with data input for site measures and reports.
• Accurately update and maintain records, databases, and spreadsheets.
• File daily and weekly reports.

Key Competencies & Skills:
? Proactive approach with a positive attitude.
? Strong communication and interpersonal skills.
? Excellent organisational skills, with the ability to prioritise tasks.
? Proficiency in Microsoft Office (Word, Excel, Outlook, Teams, PowerPoint).
? Ability to multitask and meet deadlines.
? High attention to detail and accuracy.
? Familiarity with office equipment (printers, copiers, etc.).
? Proven experience as a Technical Clerk on previous projects.
 

• Develop, implement, and monitor QA/QC procedures for MEP systems, including Mechanical and Electrical Systems.
• Conduct inspections and quality checks on MEP installations to ensure compliance with project specifications, codes, and standards.
• Review and verify MEP shop drawings, material submittals, and method statements.
• Perform site audits and issue Non-Conformance Reports (NCRs) if quality deviations are found.
• Coordinate with subcontractors to ensure quality standards are met throughout the project lifecycle.
• Implement and maintain inspection and testing plans (ITP) for all MEP installations.
• Ensure proper documentation of all QA/QC records, test reports, and approvals.
• Assist in commissioning and handover procedures, ensuring system functionality and compliance.
• Work closely with project teams to resolve quality-related issues and ensure corrective actions are taken.
• Ensure adherence to UK (England and Wales) MEP regulations, safety standards, and best practices.

• Degree or diploma in Mechanical, Electrical, or MEP Engineering.
• Proven experience in QA/QC for MEP systems in large-scale construction projects.
• Strong knowledge of MEP quality standards, inspection processes, and testing procedures.
• Familiarity with UK (England and Wales) regulations, codes, and industry best practices.
• Experience in NCR management, root cause analysis, and corrective action implementation.
• Ability to review and interpret technical drawings, specifications, and quality documents.
• Strong attention to detail and analytical skills.
• Excellent communication and reporting abilities.
• Valid work permit to work in the UK (England and Wales).

• Degree or diploma in Mechanical, Electrical, or MEP Engineering.
• Proven experience in QA/QC for MEP systems in large-scale construction projects.

Job Title: I&E Designer III
Location: Ponca City Refinery, Ponca City, OK
Schedule: Monday–Friday, 8-hour shifts (overtime possible)

Our client is seeking an I&E Designer III to work within their facilities located in Ponca City, OK, on a 1-year assignment with the possibility of extension.

Responsibilities:

• Develop and modify electrical and instrumentation (E&I) drawings for Refinery Technical Services (RTS) projects.
• Lead a team of designers and drafters, organizing and delegating tasks to efficiently complete projects.
• Work independently with minimal supervision while collaborating with engineers, mechanical craftsmen, and contractors.

Qualifications:

• 15+ years of CAD experience, with expertise in electrical or instrumentation design.
• Basic knowledge of the National Electrical Code (NEC).
• Proficiency in AutoCAD and/or MicroStation.
• Strong leadership skills with the ability to guide a project design team.
• Associate Degree in Design, Drafting, or Engineering Technology (preferred).
• Experience with SPI (SmartPlant Instrumentation) is a plus.

• Assist Construction Manager to execute and monitor all E&I works
• Ensure all aspects of the works are always carried out in the safest manner
• Managing the installation and testing of Electrical, Instrumentation, Communications, Telecoms and F&G systems
• Supervise the Electrical (HT/LT/MV/LV) installation and testing works
• Supervise the Instrumentation certification and installation works
• Experience in trouble shooting of E&I system/program
• Ensure ITP Compliant and document compilation
• Experience in managing and coordinating with other Building Services
• Ensure the full compliance of Safety and Schedule requirement
• Ensure productivity of labour force against the budget man-hours
• Management of Foremen, Chargehands and crews
• Ensure materials and installation compliance to specifications
• Constant in-situ field inspection to ensure quality of works deliver
• Review Method Statement of Works and preparation of FLRA’s with crews
• Perform FAT and SAT inspection
• Perform system line check, field instrument checks and certification
• Perform calibration, functional check, Loop check and respective testing
• Perform system walk-down, line check and punch-listing
• Trouble shooting and clearing of all punch item and closure
• Experience in Pre-com & COM as well as validation of respective system
• Close coordination with other project team/trade members
• Review and interpret drawing/shop drawing
• Manage sub-contractors and monitor progress and reporting
• Handle Walk-down, Punch-listing, Clearing and Closure
• Interface and Coordinating with Client/QP representative

• E&I Trade back-round
• Minimum 5-10 years’ experience post qualification
• Knowledge of Good Engineering practices
• Well versed in interpretation of Construction drawings to review and comment
• Min 5 years’ experience in Petrochemical, Oil & Gas, Pharmaceutical and Heavy Industrial Industries
• Familiar with Permit to work environment
• Familiar with FastTrack project environment
• Fit and ready for construction / Oil & Gas /site environment
• Be Independent and Pro active
• Be prepared to be fulltime and at ease in field supervision
• Be prepared to work extended hours per site requirement
• Be a teamwork player with good interpersonal skill

• Work closely with project managers and quantity surveyors to develop monthly progress applications covering labour, materials, plant, and equipment costs.
• Conduct take-offs from construction drawings, managing and recording design changes throughout the project lifecycle.
• Monitor construction progress, document delays, and provide Cause & Effect analysis to the client.
• Prepare and submit early warnings/variation claims for additional work beyond the agreed scope.
• Identify and mitigate commercial risks, ensuring clear and effective risk management.
• Prepare internal monthly commercial reports and oversee financial aspects of the project.
• Conduct contract reviews and deliver high-quality reports to project leadership teams.
• Monitor earned values and conduct weekly spend vs. earned value calculations.
• Participate in project handover meetings for seamless construction execution.
• Work with the Project Manager to prepare and update CCS budgets.
• Develop and maintain cash flow forecasts, analyzing sales and cost timing.
• Track project delivery status and provide insights to leadership teams.
• Mentor junior personnel to enhance their technical and commercial capabilities.
• Address and resolve project-related commercial challenges, liaising with legal teams when necessary.
• Ensure maximum profitability on assigned projects through proactive commercial strategies.
• Compile and present monthly reports as directed by the Commercial Manager.
• Monitor site progress and ensure timely claims for loss recovery in accordance with contract conditions.
• Identify areas where target costs and sales are not being met, reporting findings to the Commercial and Project Managers.
• Undertake additional duties as required by the company.

• Degree in Quantity Surveying, Electrical Engineering, or a related field; a trade background is an advantage.
• Minimum 5 years of experience in quantity surveying within the Electrical & Instrumentation (E&I) sector.
• Strong understanding of contract development, award, administration, and close-out in multi-discipline construction projects.
• Up-to-date knowledge of industry standards and technical advancements.
• Experience working with FIDIC, ICE, or similar contract formulation standards.
• Proven experience in international contracting companies adhering to recognized standards.
• Excellent communication skills and proficiency in English.
• Competency in preparing Material Take-Offs (MTOs) and compiling Actual Construction Measures.
• Strong ability to take ownership of responsibilities and meet project objectives on time.
• Proficiency in Microsoft Word and Excel.
• Eligibility to work in the UK

Vacancy Overview

Electrical Engineer – Thurrock, UK

• Responsible for ensuring quality and approving of electrical design deliverables, makes independent decisions on Electrical Engineering issues.?
• Helps to maintain & improve Electrical Engineering standards?
• Ensure Safety, Health and Environment protection are inherent in Electrical Engineering design
• Provides expert technical support and liaising directly with clients.?
• Knowledge of British/European Standards and codes of practice including ATEX?
• Carry out design of power distribution and protection systems for both LV, MV and HV?
• Carry out design of motor control circuits including VSD applications.?
• Carry out protection studies and calculations for LV and MV systems?
• Experienced with selection & specification of electrical distribution & control equipment.?
• Supervises a team of Engineers & designers for delivery of detailed work packages according to programme and cost requirements.?
• Responsible for preparation of cost and man-hour estimates.?
• Set out of Systems Turnover requirements to be led by QAQC & STO teams
• To direct and coordinate all project electrical engineering issues related to equipment specification, procurement, and installation design such as: Procurement strategy, Preparation of specifications, Selection of suppliers, Technical and scope supervision of contracts, Review of vendor data, Verify critical calculations, Factory Acceptance Testing, Liaison with other disciplines on packages, Support to site during installation and commissioning.
• To monitor the progress of Electrical engineering documents through the computerized Document Management System (e-DMS) and the Production Controller (e-CDR).
• To manage the resources required for the electrical engineering scope of a project.
• Identify in advance when overtime work is required to comply with the engineering scope of work and get Electrical Discipline Manager’s approval.
• To check specifications and drawings.
• To ensure that the Safety Management System and Quality Assurance requirements are followed throughout the engineering phase.
• To provide technical expertise to Electrical engineering activity.
• To examine and find solutions for complex Electrical engineering challenges.
• To discuss the project deliverables with Engineering Project Managers and to ensure their timely and cost-effective execution.
• To ensure that all relevant Standard instructions (SI's) and Department Working Instructions (DWI's) are correctly followed in the engineering phase.
• To visit suppliers and monitor their activities.
• To evaluate bids and documentation from suppliers.
• To keep abreast of relevant developments in Electrical engineering with respect to the offshore industry in general and the Company’s business in particular.
• To make presentations and represent the Company to clients.
• To provide feedback to the Electrical Discipline Manager regarding the performance of his/her Team for appraisal preparation purposes.

• Design experience included Cable Calculation, Earthing and Containment. 
• Electrical Engineering Degree, 5-10 years’ experience.

• Perform field observations, leadership and field walks, JSA reviews, attend toolbox meetings, and adhere to project’s safety regulations.
• Ensure piping installation, cleanliness, testing & restoration are code compliant, adhering to the project specifications, applicable drawings, manufacturer recommendations and industry standards.
• Maintain accountability on deliverables to PALNG within specific discipline and monitor the progress of work, participate in punch list walkdowns.
• Develop firm understanding of system scoping from the beginning and prepare to walk the systems in the areas involved. Compile the drawings and specifications associated with each system, well in advance.
• Oversee and manage contractor(s) construction activities to ensure compliance with the EPC contract, applicable permits, site regulations and construction safety program and monitor the schedule compliance.
• Participate in system walkdowns, reporting punch items and clearing them through inspections.
• Interface and respond to technical queries from internal stack holders, EPC contractors, subcontractors, suppliers, and other counterparties required.
• Ensures zero accident philosophy and requirements are implemented and adhered to by craft and others when in the operational area, and tools and equipment are in safe condition and operated safely.
• Participate in regular contractor construction meetings.
• Review contractor’s procedures, reports and quality of the product to ensure compliance and EPC contract requirements.
• Coordinate with Commissioning and Start-up Manager and engineers to facilitate start-up of the project in accordance with operations agreed system turnover plan and plant performance testing and expectations.
• Manage compliance with proper and manufacturer required storage/preservation requirements.
• Ensure safe and secure heavy haul & heavy lift program for all transported equipment to and within the site.
• Perform other duties as assigned (no more than 5% of duties).

• 10 years of experience managing major mechanical construction projects including the construction of LNG, Oil & Gas, and energy infrastructure projects.
• 5 years of experience with brownfield projects.
• 5 years of background in management or construction of energy infrastructure projects.

• Knowledge of a single or multi-discipline construction or engineering operation relating to field activities.
• Strong leadership abilities to build positive team environment, manage and influence team performance including mentoring.
• Possess positive attitude and has the ability and poise to be professional during crucial discussions with senior management, and/or while presenting critical information requiring management decision to overcome issues and concerns regarding the site operations.
• Good working knowledge and proficiency in the use of Microsoft Office Suite, i.e. Word, Excel & PowerPoint to convey information with clarity through presentations and reports.
• Develops firm understanding of system and area scoping and drawings required for package development.
• Technical knowledge of a specialized engineering discipline, cost, scheduling and/or contracts administration relating to the construction of heavy industrial or commercial complexes.
• Strong knowledge of engineering and construction standards, materials, and companies/vendors processes.
• Ability to manage multiple and complex issues and work independently.
• Good working knowledge of piping, supports, valves and other related items for gas industry.
• Experience in executing heavy industrial projects in oil, gas, refinery process, petrochemical and power generating stations

• Valid Driver’s License required.
• Transportation Worker Identification Credentials (TWIC) preferred.

Vacancy Overview

E&I Supervisor – Thurrock, UK

• Assist Construction Manager to execute and monitor all E&I works 
• Ensure all aspects of the works are carried out in the safest manner at all times
• Managing the installation and testing of Electrical, Instrumentation, Communications, Telecoms and F&G systems
• Supervise the Electrical (HT/LT/MV/LV) installation and testing works 
• Supervise the Instrumentation certification and installation works 
• Experience in trouble shooting of E&I system/program 
• Ensure ITP Compliant and document compilation 
• Experience in managing and coordinating with other Building Services 
• Ensure the full compliance of Safety and Schedule requirement
• Ensure productivity of labour force against the budget man-hours
• Management of Foremen, Chargehands and crews
• Ensure materials and installation compliance to specifications
• Constant in-situ field inspection to ensure quality of works deliver 
• Review Method Statement of Works and preparation of FLRA’s with crews
• Perform FAT and SAT inspection 
• Perform system line check, field instrument checks and certification 
• Perform calibration, functional check, Loop check and respective testing 
• Perform system walk-down, line check and punch-listing 
• Trouble shooting and clearing of all punch item and closure 
• Experience in Pre-com & COM as well as validation of respective system 
• Close coordination with other project team/trade members 
• Review and interpret drawing/shop drawing 
• Manage sub-contractors and monitor progress and reporting 
• Handle Walk-down, Punch-listing, Clearing and Closure 
• Interface and Coordinating with Client/QP representative

• E&I Trade back-round 
• Minimum 5-10 years’ experience post qualification
• Knowledge of Good Engineering practices 
• Well versed in interpretation of P&ID drawing to review and comment 
• Min 5 years’ experience in Petrochemical, Oil & Gas or Pharmaceutical Industries 
• Familiar with Permit to work environment 
• Familiar with FastTrack project environment
• Fit and ready for construction / Oil & Gas /site environment 
• Be Independent and Pro active 
• Be prepare to be fulltime and at ease in field supervision 
• Be prepare to work extended hours per site requirement 
• Be a team work player with good interpersonal skill

1. Aveva E3D Administration
2. Company’s customization implementation in Aveva E3D
3. Maintenance of existing Technip Energies customization and Piping Support libraries in Aveva E3D
4. Task automation via PML in Aveva E3D
5. Aveva Global satellite configuration and monitoring for 3D model sharing with other operating centers.

1. Project procedures
2. Software documentation
3. Documentation and customization codes and settings from past projects

1. Good knowledge of Aveva E3D administration (application set-up, customization, DABACON database administration, …)
2. Knowledge of Aveva PML programming language
3. Experience in setting-up Aveva E3D Support module
4. Aveva E3D administration on large projects, in oil & gas projects, or nuclear industry projects, or naval construction projects.
5. Ability to work in an international team, with other administrators located in multiple operating centers in different countries.
6. Ability to work in English (written, spoken)

Vacancy Overview

Senior Instrumentation Engineer – HVAC Packages – Paris, France

Vacancy Overview

Electrical Supervisor

• Safety: Complete all necessary safety trainings (IF+, HSE Golden Rules, etc.) in a timely manner. Understand Company HSE Policy and HSE KPIs and demonstrate a responsible and constructive HSE behavior during whole project life. Abide by local, international, and Company safety standards and engage (stop work) in unsafe activities and create positive/negative observation cards. Attend TBM (Toolbox Meeting) regularly for daily structural activities and normally stay worksites to supervise all works are carried out in a safe manner.   
• Quality: Have a clear understanding on Company Standards and Project Specifications. Coordinate with CTR construction team to achieve Quality KPIs
• Drawings/Procedures: Review electrical drawings (AFC, Shop drawings, as built, etc) and Electrical execution procedures. Make sure all shop drawings and procedures properly ready for fabrication and installation of Electrical Support, Equipment. Lead CTR to prepare as-built drawings and submit them to CPY in a timely manner.
• Materials and storage: Monitor delivery of EIT materials to WORKSITE and participate in Inspection on Receipt as per requests. Make sure CTR to store EIT equipment in compliance with CPY specification/Standards and Vendor’s recommendations.
• Fabrication: Monitor CTR to furnish qualified personnel and all equipment, tools, instruments in a timely manner. Closely monitor and supervisor all EIT activities carried out in accordance with approval procedures, drawings, specifications, etc. Gather daily CTR EIT manpower and report it to EIT Superintendent.
• Pre-Commissioning: Have a clear understanding of Pre-commissioning Specification and lead EIT pre-commissioning activities and punch list to be closed out based on the baseline schedule
• Good Communication: Set up proper communication channel with CTR counterpart and implement daily tool box talks with CTR to discuss about prioritizing activities for short term and long term basis.   

• Bachelor’s degree or equivalent in engineering and construction
• Ex (ATEX, EEHA) Certificates

• At least 15 years’ experience in offshore piping fabrication the offshore oil & gas project, with minimum 3 years’ experience in fixed platforms – topside and/or jacket.   

• Available for technical missions worldwide
• Available for technical missions worldwide,
• Familiar with TotalEnergies / NOC General Specifications, relevant codes
• Ex (ATEX, EEHA) experiences
• Ability to work in a team oriented, collaborative environment is essential. 
• Language: Fluent in English,
• Computer literate,
• Strong leadership skills and good communication skills,
• Ability to work on projects in a complex and multicultural environment,
• Good analytical skills

Vacancy Overview

Safety Advisor

• Ensure HSE compliance across all phases of the EPCI project, including engineering, procurement, fabrication, installation, and commissioning.
• Conduct risk assessments, safety audits, and inspections to identify hazards and ensure corrective actions are implemented.
• Enforce adherence to local and international HSE standards and best practices.
• Develop and deliver safety training programs for employees, contractors, and site personnel.
• Investigate incidents, near misses, and safety violations, preparing reports and recommending corrective actions.
• Lead toolbox talks, safety meetings, and awareness campaigns to promote a strong safety culture.
• Collaborate with project managers, engineers, and site supervisors to integrate HSE best practices into daily operations.
• Ensure proper implementation of permit-to-work (PTW), Job Safety Analysis (JSA), and hazard identification procedures.
• Monitor occupational health and environmental impact to ensure compliance and sustainability.
• Liaise with subcontractors and regulatory authorities to maintain high safety standards.

• Bachelor’s degree in Occupational Health & Safety, Engineering, or a related field.
• NEBOSH IGC (International General Certificate) or equivalent certification is mandatory.
• 5+ years of experience in HSE roles within the offshore/onshore oil & gas industry.
• In-depth knowledge of EPCI project safety requirements, risk management, and hazard control.
• Experience in conducting incident investigations and root cause analysis.
• Strong communication, leadership, and training skills.
• Ability to work in a high-risk environment and make sound decisions under pressure.

• OSHA 30-Hour / 40-Hour Training in Construction Safety.
• ISO 45001 Lead Auditor Certification.
• HAZOP / HAZID Risk Assessment Training.
• Offshore Survival & HUET (Helicopter Underwater Escape Training).

Position: Senior Environmental Advisor
Company: Tier 1 EPCM in Mining
Location: 2:1 FIFO ext. Perth 
Employment Type: Casual Contractor
Contract length: Initial 12 months with possibility of extension

Role Overview

Our client, a leading global EPCM, is looking for mid to senior-level Environmental Advisors to join one of their largest site teams to date on a 2:1 FIFO roster ext. Perth. As a Site Environmental Advisor, you will play a key role in supporting major development projects, offering guidance on environmental approvals, and developing and maintaining compliance programs throughout the project’s execution.

As a key member of the team, you will:

• Implementing the project CEMP and EMS
• Training site teams and contractors (inductions, land disturbance, and biodiversity identification)
• Relocating fauna after completing fauna handling training
• Conducting pre-clearing fauna surveys after completing fauna surveyor training
• Assisting with the execution of the Land Disturbance Procedure
• Compliance reporting, including NGERS, waste, monitoring, and Part IV licence reports
• Monitoring dust, noise, vibration, and vegetation
• Advising contractors and project management teams
• Conducting inspections and audits
• Implementing Heritage Protection Plans in collaboration with Traditional Owners

What you’ll have:

• Tertiary qualifications in Environmental Science, Natural Resource Management, or related fields, with experience in environmental approvals.
• Strong understanding of Commonwealth and State/Territory (preferably WA or NSW) environmental approvals compliance.
• Significant experience in a similar role within the natural resources industry.
• Proficient in GIS software, data management, EMS reporting, and data interpretation.
• Solid understanding of environmental and social risks in natural resources projects.
• Strong at building relationships, collaboration, and negotiation.
• Unrestricted driver’s license and valid Australian working rights.

Extra info:

• Opportunities exist to conduct EMT training. 
• All personnel are provided with 4WD training and fauna handling training prior to mobilisation.

About Airswift 

Airswift is an international workforce solutions provider within the energy, process and infrastructure industries. Airswift serves as a strategic partner to our clients, offering a turnkey workforce solution to capture and deliver the top talent needed to complete successful projects by aligning with the unique needs of our clients. 

With over 1000 employees and 9,000+ contractors operating in over 130 countries, our geographical reach and pool of talent available is unmatched in the industry and the level of experience, exposure and expertise that the organization has is unparalleled.

Only candidates with the right to work in Australia will be considered. (Australia Citizen, PR Holder, or Valid Australia working VISA)

If you would like to be considered for the position, please apply directly to this advertisement or send your application via email to tiffany.kew@airswift.com with your updated CV/ resume & contact details. Alternatively, you may contact Tiffany at +61 (08) 6256 0338 for more information.

Vacancy Overview

Project Engineer

• Assist in the execution of EPCI projects, ensuring compliance with contract requirements, safety standards, and project specifications.
• Coordinate between engineering, procurement, construction, and installation teams to ensure seamless project delivery.
• Develop and maintain project schedules, progress reports, and technical documentation.
• Interface with clients, subcontractors, and vendors to resolve technical and operational challenges.
• Ensure compliance with Client standards, local regulations, and international codes.
• Support pre-commissioning, commissioning, and startup activities.
• Conduct risk assessments and implement mitigation plans.
• Provide technical support and problem-solving during project execution.
• Ensure HSE (Health, Safety, and Environment) compliance across all project phases.
• Participate in project meetings, site visits, and inspections as required.

• Bachelor’s degree in engineering (Mechanical, Electrical, Instrumentation, Civil, or related field).
• 5+ years of experience in project engineering within the offshore/onshore oil & gas sector.
• Strong knowledge of EPCI project execution, fabrication, installation, and commissioning.
• Proficient in project management tools (Primavera P6, MS Project, etc.).
• Strong understanding of engineering standards, codes, and regulations.
• Excellent communication, coordination, and leadership skills.
• Ability to work in a multicultural environment with international teams.

• PMP (Project Management Professional) Certification is an advantage.
• Offshore Survival & HUET (Helicopter Underwater Escape Training) certification.
• HSE & Risk Management Training.

• Job Type: Contract
• Work period: Full-Time
• Duration: 31-03-2025 TO 24-01-2026
• Location: Mentone, Texas, United States
• Visa Sponsorship: Not Available

Elevate Your Career in Production Tech III

Are you ready to join our team as a Production Tech III and make a significant impact in the oil and gas industry? As a Contract Production Technician, you will be responsible for maintaining and troubleshooting compression equipment in the Mentone Wolf Camp production area. With your strong mechanical skills and experience in production forecasting and analysis, you will play a crucial role in meeting production targets and ensuring optimal performance.

Role Overview

• Routine Maintenance and Repairs: Perform maintenance and repairs on compression equipment, including compressors, pumps, and other mechanical systems.
• Troubleshooting and Diagnosing: Utilize your mechanical skills to troubleshoot and diagnose equipment failures and implement corrective actions.
• Collaboration with Production Teams: Work closely with production personnel to ensure equipment performance aligns with production targets.
• Installation and Commissioning: Assist in the installation and commissioning of new equipment.
• Equipment Performance Monitoring: Monitor equipment performance and conduct regular inspections to ensure compliance with safety, operational, and environmental standards.
• Record Keeping: Maintain accurate records of maintenance activities, parts used, and equipment performance.
• Independent and Team Work: Work independently and as part of a team to support the efficient operation of the compression systems.
• Safety Compliance: Ensure all work is completed in accordance with Occidental Petroleum's safety procedures and industry regulations.

Skills & Qualifications

• Strong Mechanical Skills: Ability to read technical schematics and manuals.
• Production Experience: Proven experience in maintaining and troubleshooting compression equipment, ideally in an oil and gas production environment.
• Problem-Solving Skills: Excellent problem-solving skills and attention to detail.
• Flexibility: Ability to work both independently and collaboratively in a fast-paced, team-oriented environment.
• Commitment to Safety: Strong commitment to safety, quality, and environmental standards.
• Communication Skills: Excellent communication skills are needed due to dealing with various vendors in the field.

Education & Experience

• Experience: Minimum 5 years of experience in compression maintenance.
• Education: High school diploma or equivalent required. Technical or trade school degree preferred.

Pay & Benefits

• Competitive pay rate of $35-40/hr.
• Mancamp available if needed.
• Opportunity to work with a well-respected company in the oil and gas industry.
• Potential for future employment opportunities with Occidental Petroleum.
• Flexible work schedule with 12-hour rotating shifts.
• Opportunity for travel to different locations for work assignments.

Unlock your potential with Airswift. Apply now!

About Airswift

Airswift is a global workforce solutions provider specializing in the engineering and technology sectors. With operations spanning over 70 countries, we boast a talent pool of over 9,000 contractors and 1,000 employees. Our unparalleled reach and expertise are unmatched in the industry. Learn more about Airswift at https://www.airswift.com/blog.